Macro Cell

Radio Access Networks

Macro Cell

Tecore Networks CoreCell-E provides a radio access node for User Equipment (UEs) connecting to a 4G LTE network. The CoreCell-E is a nodal component of the Evolved UMTS Radio Access Network (E-UTRAN) and integrates seamlessly with Tecore’s 4G LTE Evolved Packet Core (EPC) over an All-IP packet data network. This integration provides a complete LTE network solution for commercial, government, military, and emergency response applications. Wireless operators are demanding greater packet data throughput on their mobile devices and applications.

Tecore’s CoreCell-E addresses these requirements by providing scalable bandwidth options, enhanced modulation techniques, and MIMO, allowing for more energy per bit and more bits per hertz. These enhanced techniques translate into better quality of service, higher bit rates for packet data- intensive applications, an evolution path for existing 2G and 3G networks as well as Greenfield 4G LTE network deployments.

Key Benefits

  • Integrated Digital Pre-Distortion (DPD)
  • Integrated Crest Factor Reduction (CFR)
  • Integrated alarm and fault management including forward power, VSWR, and operating status


MIMO:Power Consumption (Typical):
2x2200 Watts
Radio Access Technology:Weight:
2G/3G/4G/5G*26.5 lb / 12 kg
Multi-Radio Access Technology:i/Q Connectivity:
RF Output Power:Management Interface:
40W (20W per port)Local Gigabit Ethernet
Dimensions:RET Control AISG V2.0
11.6 x 7.9 x 6 in /
29.5 x 20.1 x 15.2 cm

*Partial NR support up to 40 Mhz of NR bandwidth.